Clean Environment Starts with Clean Floor
It is helpful for the interior/exterior environment to be kept clean with the dust prevention and fouling resistant functions.
If it is applied to areas exposed to frequent shocks and abrasions, dust can be prevented, caused by the damaged body.
It does not get easily discolored or peeled by various pollutants, so the initial gorgeous look can be maintained for a long time.
UNIPOXY Marble
A color flooring material whose main element is an epoxy resin
PURPOSE
Color flooring for the interior
FEATURES
Color epoxy, interior
DIMENSION
10.5kg (Mix 14kg)
HOW TO USE
A barrel of colored pearl paint is mixed with the bosis. Then, add hardener. Apply it with an iron rake or a taping knife.
UNIPOXY Primer
As an epoxy- polyamide resin 2-component coating, it has excellent applicability and chemical/water resistance.
PURPOSE
Concrete primer for pharmaceutical, precision equipment, electronic factory, hospital, parking lot, etc.
Features
Primer, applicablet
DIMENSION
7L (Mix 14L)
HOW TO USE
Coat 1 time with a brush, roller, or sprayer to make the final thickness 50μm in the first dry condition.
UNIPOXY Lining Clear
A solventless clear topcoat flooring material whose main element is an epoxy resin
PURPOSE
Thick-film clear solventless topcoat for concrete in lab, hospital, electronic/ chemical/ pharmaceutical plants
FEATURES
Clear
DIMENSION
12.4kg (Mix 16kg)
HOW TO USE
Coat with an iron rake or a taping knife to make the make the final thickness 1,000~3,000㎛.
UNIPOXY Resin Mortar
A high-strength epoxy resin/mortar 3-component flooring material where a special polymer is mixed with silica sand
PURPOSE
Flooring for parking lot, hospital, and industrial areas where impact/abrasion/slippery resistance are needed
FEATURES
Resin mortar
DIMENSION
Colored 13.3kg (Mix 16.97kg)Clear 12.5kg
HOW TO USE
Coat 1 time with a trowel, spatula, and finisher to make the final thickness 3~5㎜.
UNIPOXY Coating
A 2-component thin-film epoxy flooring material whose main element is an epoxy/polyamide resin
PURPOSE
1Floor topcoat for concrete/ mortar including pharmaceutical / precision equipment/ electronic plant, and hospital
Features
Thin film type
DIMENSION
12kg (Mix 16kg)
HOW TO USE
Coat 2-3 times with a brush, spray or an oil roller to make the final thickness 50㎛ in the first dry condition.
UNIPOXY Anti-Static
A 2-component coating whose main element is an epoxy/polyamide resin
PURPOSE
1) Electronic /electrical /semiconductor and parts, combustible gas, and organic solvent handling areas
2) Industrial antistatic paint
FEATURES
Antistatic
DIMENSION
16L
HOW TO USE
Coat 2 times with a brush, roller, or sprayer to make the final thickness 30μm in the first dry condition.
SUNITHANE Primer
A 2-component water-soluble urethane coating * Quality standard: LH specification 2.7 Baseboard paint
PURPOSE
Reinforcing primer of in/exterior concrete/cement mortar in multiuse facilities and offices
FEATURES
Primer, water-soluble
DIMENSION
10L (Mix 12L)2.5L (Mix 3L)
HOW TO USE
Coat 1 time with a brush or roller to make the final thickness 40μm in the first dry condition.
SPORTHANE Seal,
A curing coating whose main element is a polyurethane resin
PURPOSE
1) Waterproof flooring paint
2) Fill concrete crack/joint 3) Fill pinholes 4) Waterproof for vertical wall
Features
Thixotropic, filler
DIMENSION
10kg (Mix 12kg)
HOW TO USE
Fill SPOTHANE SEAL with a rubber and an iron rake. Repairing a crack is the same as putty. Fill a pinhole consistently.
HYPERUREA PU295A
A pure-urea, curing coating whose main element is a polyurea resin
PURPOSE
1) Waterproof concrete/building
2) Prevent water/corrosion in flooding area 3) Flooring of steel parking lot
FEATURES
Pure urea, rapid hardening, KS
DIMENSION
200kg (Mix 385kg)
HOW TO USE
Coat with an impingement mixing polyurea sprayer to make the final thickness of 2-3㎜.
HYPERUREA BR595A(SL)
A curing urea coating with the reaction to polyurea and great adhesiveness and mechanical properties
PURPOSE
Waterproof for concrete, flooring material
FEATURES
Ordinary urea/hardening, KS, waterproof
DIMENSION
7kg (Mix 15.4kg)
HOW TO USE
Coat 1 time with an exclusive rake, roller, and Hera to make the final thickness 1.5㎜ in the dry condition.
SPORTHANE High Hard Layer Floor Coat(Sealer)
A curing coating whose main element is a polyurethane resin, having great adhesiveness and mechanical properties
PURPOSE
1) Priming coat for waterproof concrete
2) Priming coat for concrete parking lot/common floor
Features
Priming coat, high hardness
DIMENSION
114.74kg (Mix 20kg)
HOW TO USE
Coat with an exclusive rake, roller, and Hera to make the final thickness 500㎛ in the dry condition.
SPORTHANE High Hard Layer Topcoat(Exterior)
A 2-component coating whose main element is an epoxy/polyamide resin
PURPOSE
1) Electronic /electrical /semiconductor and parts, combustible gas, and organic solvent handling areas
2) Industrial antistatic paint
FEATURES
Antistatic
DIMENSION
12L (Mix 16L)
HOW TO USE
Coat 2 times with a brush, roller, or sprayer to make the final thickness 30μm in the first dry condition.
KCC CORK-Binder,
It is a 1-component solventless polyurethane binder product.
PURPOSE
Reinforcing primer of in/exterior concrete/cement mortar in multiuse facilities and offices
FEATURES
Cork, binder
DIMENSION
18kg
HOW TO USE
Mix paints with flooring materials(cork chips or sand and gravel) to coat.
KCC Hard Floor Coating
It is a hybrid surface protection agent for polished concrete.
PURPOSE
Polished concrete surface, or concrete floor of plant, warehouse, processing plant, convention center, etc.
Features
Surface protective agent
DIMENSION
20kg
HOW TO USE
Thoroughly coat with a soft brush, roller, or sprayer.
KCC CRETE
As a 3-component high-hard polyurethane resin mortar product, it is suitable to flooring.
PURPOSE
All concrete floors should be protected from various chemicals or with frequent traffic
FEATURES
Chemical/abrasion resistant, high-strength
DIMENSION
Bosis 1kg Hardener 3kg Powder 19kg
HOW TO USE
Coat 1 time with the paint of 1.5~3kg/㎡. Even out with a squeeze, trowel or screed bar. Let the air out with a spike roller.
UNIPOXY Lining
A solventless thick-film type flooring material whose main element is an epoxy resin
PURPOSE
Thick-film epoxy flooring topcoat for concrete in lab, hospital, electronic / chemical/ pharmaceutical plants
FEATURES
Thick film type
DIMENSION
20kg (Mix 24kg)
HOW TO USE
Coat with an iron rake or a taping knife(for winter) to make the final thickness 1,000~3,000㎛.
UNIPOXY Embo-Coat
A solventless embossed flooring material whose main element is an epoxy resin
PURPOSE
Floor coating for concrete parking lot where noise/dust reduction are required
Features
Embo
DIMENSION
11.2L (Mix 14L)
HOW TO USE
Coat with an embossed sponge roller to make the final thickness of 200~300㎛.
UNIPOXY Chemical Resistance
A chemical-resistant flooring material whose main element is an epoxy resin
PURPOSE
Epoxy topcoat for concrete floor for lab, hospital, electronic/ chemical/pharmaceutical plant
FEATURES
Acid resistant
DIMENSION
11L (Mix 16L)
HOW TO USE
Coat 2 times with a brush, roller, or sprayer to make the final thickness 30μm in the first dry condition.
HYPERUREA BR595A(VT)
A curing urea coating with the reaction to polyurea and great adhesiveness and mechanical properties
PURPOSE
Waterproof for concrete, flooring material
FEATURES
Ordinary urea/hardening, KS, waterproof, vertical wall
DIMENSION
7kg (Mix 15.4kg)
HOW TO USE
Coat 1 time with an exclusive rake, roller, and Hera to make the final thickness 1.5㎜ in the dry condition.
NEONTHANE Topcoat
A 2-component fluorescent floor coating whose main element is an acrylic polyurethane resin
PURPOSE
Topcoat for concrete/cement mortar of places requiring visibility including indoor pedestrian/parking lot area
Features
Fluorescent
DIMENSION
11kg (16.5kg) 2kg (3kg)
HOW TO USE
Coat 1 time with a brush, roller, or sprayer to make the final thickness 50μm in the first dry condition. (SPORTHANE HIGH HARD LAYER TOPCOAT(EXTERIOR) PTA-white 50㎛ + Neon-thane Topcoat 50㎛)
UNIPOXY Lining
A solventless thick-film type flooring material whose main element is an epoxy resin
PURPOSE
Thick-film epoxy flooring topcoat for concrete in lab, hospital, electronic / chemical/ pharmaceutical plants
FEATURES
Thick film type
DIMENSION
20kg (Mix 24kg)
HOW TO USE
Coat with an iron rake or a taping knife(for winter) to make the final thickness 1,000~3,000㎛.
UNIPOXY Embo-Coat
A solventless embossed flooring material whose main element is an epoxy resin
PURPOSE
Floor coating for concrete parking lot where noise/dust reduction are required
Features
Embo
DIMENSION
11.2L (Mix 14L)
HOW TO USE
Coat with an embossed sponge roller to make the final thickness of 200~300㎛.
UNIPOXY Chemical Resistance
A chemical-resistant flooring material whose main element is an epoxy resin
PURPOSE
Epoxy topcoat for concrete floor for lab, hospital, electronic/ chemical/pharmaceutical plant
FEATURES
Acid resistant
DIMENSION
11L (Mix 16L)
HOW TO USE
Coat with an iron rake or a taping knife to make the final thickness 2~3㎜ in the dry condition.